Table Top Ultrasonic

Product Details:

Ultrasonic Cleaning Equipment is a highly effective and recommended process for the cleaning of reusable medical Instruments such as the one’s used in Dental Offices / Clinics / Hospitals. Very much a part of Dental Equipment now, the process of treating Dental Instruments with Ultrasonic Cleaner not only helps remove the blood stains, but also the left tissues as well as contaminants from the instruments. Before the process of disinfecting and sterilization of Dental Instruments, we highly recommend that the Instruments must be treated with Ultrasonic Cleaning.

The Process of Ultrasonic Cleaning enables water bubbles to agitate the contamination and help reach the imploding water bubbles into tiny cracks and crevices thereby cleaning the instruments. Ultrasonic Cleaning is highly effective in the cleaning of picks, drills, mold spoons; prostheses such as dentures and crowns, and to remove cement and plaster as well.

The Dental Instruments possess a greater threat of spreading the contamination if not cleaned and sterilized properly. We at R.K.Trasnonic Engineers have specially designed machines for the cleaning of such small Dental Instruments.

An Medical Ultrasonic Cleaner comprises of a tank (with different sizes), motor/ circuit for cleaning the Surgical Items, a removable basket / tray. To begin the cleaning process, the cleaning tank is filled with warm water or a cleaning solution. Cleaning solutions can consist of non-ionic surfactants & detergents.. You can then place the Surgical Item(s) in a small basket and place that basket inside the tank.

When you switch on the machine, ultrasound waves and chemicals combined to create bubbles that "cling" to the foreign particles such as dirt, oil, and unknown substances. The high frequency waves are sent out and pull the contaminants off of the object. The vibrating motion of the ultrasonic waves creates tiny bubbles in the water known as cavitation; millions of these bubbles rubs against each-other and into the object resting in the cleaning tank. This cavitation process gently knocks dirt & stain off the object. The motion is very effective at penetrating the tiny crevices which is not possible via human hand or by dunking the instrument in water/ chemical alone.

The Ultrasonic Cleaning Cycle time for the Surgical Instruments is approximately 3-5 Minutes depending upon the quantity of objects placed in the basket as well as the level of contamination of the same. Once you set the timer, the machine does its work in few minutes and the dirt now rests in the bottom of the tank. The cavitation effect blasts the particles off the instrument’s surface and leaves them in the solution. You can now remove the basket along with the Instruments and clean them with a dry soft cloth.

Additional Information:

• Item Code: RKTD4.5
• Production Capacity: 100
• Delivery Time: 2 Days
• Packaging Details: Corrugated Box

Product Details:

Ultrasonic Bath are used for a variety of sonication purposes. We offer our Ultrasonic cleaning machine for cleaning & sonication processes. 

This is a 4.5 Liter Ultrasonic Cleaning machine which is widely used by labs, pharma and many industries for cleaning & sonication purpose. The machine is equipped with powerful 180 Watts of Ultrasonic Wattage combined with a heating power that can be digitally controlled by a thermostat. 

The machine is a portable unit and yet built in a stainless steel structure that makes it better equipped to work in a more roburst environment. The machine comes with stainless steel top lid cover along with stainless steel material handling basket.

As a part of accesorry; we also offer special purpose jigs, fixtures, material handling baskets as well as beaker holders at request. Kindly get in touch with our team for more details on the same.

Additional Information:

• Item Code: RKT180
• Production Capacity: Delhi
• Delivery Time: Same Day in Delhi NCR (3-5 Days in Other Regions)
• Packaging Details: Corrugated Box

Product Details:

22 Liter Laparoscopic Instruments  - Digital Table Top Ultrasonic Cleaner 

We offer our Digital 22 Liter Laparoscopic Instrument washing Ultarsonic Cleaner. It is a compact yet powerful machine with 480 Watts of Ultrasonic Power which comes along with Heating capatiy of upto 80 Deg cel.

The material make of the machine is medical grade 304 grade Stainless Steel construction body which makes it ideal to be used in industrial and hospital settings.

The machine can accomadate instruments - 16 - 18 inches long in the working chamber and the machine can take a maximum load of upto 3 Kgs of material weight at a time.

The cleaning time is settable from 1 Minutes upto 99 Minutes. The ideal cleaning time is 10 - 15 Minutes for heavily contaminated instruments. 

Additional Information:

• Item Code: RKTLAP22L
• Production Capacity: 100
• Delivery Time: 2 Days
• Packaging Details: Corrugated Box

Product Details:

Wrist Watches, Bracelets and Chains are some of the most priced possessions and to keep them in shape is one thing which indeed cannot be neglected. While for some people changing the strap of the Wrist Watch is a convenient option if being dirty but when you owe an expensive one, then probably changing the strap timely might be an expensive affair. Now instead of tiring regular brushing of chain straps with toothbrushes, we hereby introduce our Ultrasonic Watch Cleaning which is a small tank with water and soapy solution. Just place your Watch inside the tank, switch on the machine and take the watch out of the tank in 3-4 Minutes.

Advantages:

• Ultrasonic Cleaning Machines are Versatile in Nature and can Clean your Wrist Watches, Rings, Chains, Bracelets and small Machined Parts.
• Since Ornaments like Watches & Chains are in regular contact with your body, Ultrasonic Cleaning ensures cleaning of the dirt which has maximum potential of spreading Germs.
• Save lot of time.
• Easy to Use.

 

Additional Information:

• Item Code: RKTDTT3.2
• Production Capacity: 100
• Delivery Time: 2 days

Product Details:

2 Liter Digital Ultarsonic Cleaner for Printer Head Cleaning is one of our fastest selling machine for Printer Head Nozzle cleaning and maintenance purpose. 

The machine is made of Stainless Steel inner tank and outer tank body which makes it roburst. It has 70 Watts of Powerful Ultrasonic Wattage which is ideal yet soft for cleaning of Printer Head Nozzles. 

The machine comes with Stainelss Steel top lid cover and Stainless Steel material handling basket along with a working maual.

Digital Timer: uptp 600 Seconds of operation 
Digital Temperature: Ambient to 80 Deg Cel Settable Temperature
NOTE: Never use acidic / flammable liquid along with Ultrasonic cleaning machines

Additional Information:

• Item Code: RKTPH2L
• Production Capacity: 100
• Delivery Time: 2 days
• Packaging Details: Corrugated Box

Product Details:

We offer a wide range of Medical Ultrasonic Cleaners. This is our 4.5 Liter Portable Table Top Type Ultrasonic Cleaning machine. Such machine is widely used in the following facilties: 

1)Clinics
2) Medical Collage
3) Dental Clinics
4) Pharma Labs
5) Eye Hospitals 
6) Operation Theaters (OTs)
7) CSSD units
8) Decontamination Units 
9) Eye Clincis 
10) Vet Clinics 

Our 4.5 Liter machine is packed with 180 Watts of powerful ultrasonic cleaning wattage. It is also equipped with a heater which can be digitally controlled to get a teperature of upto 80 Deg Cel. The cleaning cycle usually lasts upto 5 - 10 Minutes per batch however it is settable and one can set upto 30 Minutes of Working time. 

The machine has a stainess steel inner tank as well as stainless steel outer tank. The machine comes with a stainless steel material handling basket along with a stainless steel basket and a user manual. 

It is a plug and play machine and thus does not require any special commissioning. We offer a 12 Months warrany on our product. 

Additional Information:

• Item Code: RKT4.5
• Production Capacity: 100
• Delivery Time: 2 days
• Packaging Details: Corrugated Box

Product Details:

An Ultrasonic Cleaner comprises of a tank (with different sizes), motor/ circuit and a  removable basket / tray. To begin the cleaning process, the cleaning tank is filled with water or a cleaning solution. Cleaning solutions can consist of non-ionic surfactants & detergents.. You can then place the PCBs in a small basket and place that basket inside the tank.

When you switch on the machine, ultrasound waves and chemicals combined to create bubbles that "cling" to the foreign particles such as dirt, oil, Flux and unknown substances. The high frequency waves are sent out and pull the contaminants off of the object. The vibrating motion of the ultrasonic waves creates tiny bubbles in the water known as cavitation; millions of these bubbles rubs against each-other and into the object resting in the cleaning tank. This cavitation process gently knocks dirt & stain off the object. The motion is very effective at penetrating the tiny crevices which is not possible via human hand or by dunking the instrument in water/ chemical alone.

The Ultrasonic Cleaning Cycle time for most processes is approximately 3-5 Minutes depending upon the quantity of objects placed in the basket as well as the level of contamination of the same. Once you set the timer, the machine does its work in few minutes and the dirt now rests in the bottom of the tank. The cavitation effect blasts the particles off the PCB’s surface and leaves them in the solution. You can now remove the basket along with the PCB.

STEPS OF CLEANING PCB USING ULTRASONIC CLEANING MACHINE

 

You will not only have to choose the correct size of the Ultrasonic cleaner, but you will also have to suggest your ultrasonic provider with quantity of PCBs that you will be cleaning in a day. If you wish to clean PCBs in thousands of quantities in a day or large volumes then you would be required to use a more robust & industrial heavy duty ultrasonic cleaner with multiple tanks or chambers. This type of machines will be a custom-built system and would be suitable for your operation. Such machines would often have a drying system along with them.

If however you are limited to cleaning a few pieces of PCBs in a day, much like repair purposes, then we recommend taking a table top Ultrasonic cleaner according to the size of the PCBs that you wish to clean. Table Top Ultrasonic cleaning machines are light duty & easy to carry machines which are convenient to use and are single tank counted top units. 

 

IPA / ISO-PROPYL ACOHOL

Traditionally, IPA or Iso-propyl alcohol is widely and popularly used for cleaning of PCB / Printed Circuit Boards. Ideally using IPA as a cleaner is “OK” with some precautions as under:

1)     When you are using IPA with a brush to clean the PCBs.

2)     When you are using an Ultrasonic Cleaner with a capacity of “no more than a 2 Liter”; with a precaution to not use Heating Element of the machine. Keeping the environment well ventilated. Strictly keeping no open switches / and fire proof zone with no open flames around. Keeping a Fire Extinguisher near the machine facility for added security.

 

WATER SOLUABLE CHEMICAL – RKT PCB CLEANER

We offer a safer and non-flammable alternative to IPA. Our specially crafted PCB cleaning solution is ideal for removing flux , dirt, dust, rust and other foreign contaminants form the PCB boards. One litre of RKT PCB CLEANER is to be diluted with three litres of water before use. 

 

Additional Information:

• Item Code: RKTPCB11L
• Production Capacity: 100
• Delivery Time: 2 Days
• Packaging Details: Corrugated Box

Product Details:

We offer a wide range of Table Top Ultrasonic Cleaning Machines. Our 15 Liter Ultrasonic Cleaning machine is a portable cleaning machine with a tank size of 13 X 12 X 6 inches. 

The machine is made of Stainless Steel tank 304 grade along with Stainless Steel top lid cover and stainless steel basket.

Liter Capacity: 15 Liter 
Digital Timer
Digital Heater 

Additional Information:

• Production Capacity: 100
• Delivery Time: 2 Days
• Packaging Details: Corrugate Box

Product Details:

There exists a wide application of ultrasonic cleaning in the medical industry. It is extensively used for:

 

Effective sterilization requires effective cleaning, and when it comes to cleaning reusable instruments and equipment, our equipment & detergents meets the most demanding criteria.  Our industrial ultrasonic cleaners are used to assist with the cleaning of instruments that cannot be adequately cleaned manually such as spiral wound instruments like biopsy forceps etc. The ultrasonic vibration at the frequency used for cleaning does not kill microorganisms and infective aerosols may be produced.

 

Ultrasonic cleaners work by subjecting instruments to high frequency, high-energy sound waves. This causes the soil to be dislodged from instruments and drop to the bottom of the tank, or be sufficiently loosened that it will be removed during the rinsing process. The detergent used in the ultrasonic tank must be carefully selected in accordance with advice from the tank's manufacturer. Optimally it will be a neutral, low-foaming product and enzymatic cleaners will have enhanced benefits in this process. 

The presence of organic material such as blood faces and respiratory secretions can result in the failure of disinfection. This may be because either the organic material protects the microorganisms from exposure to the biocide or because the biocide may be inactivated by contact with organic material. Consequently, rigorous cleaning of flexible endoscopes is required to remove such material before disinfection or sterilization. This should occur immediately after use to prevent the drying of secretions.

An Ultrasonic Cleaner comprises of a tank (with different sizes), motor/ circuit for cleaning the Surgical Items, a removable basket / tray. To begin the cleaning process, the cleaning tank is filled with warm water or a cleaning solution. Cleaning solutions can consist of non-ionic surfactants & detergents.. You can then place the Surgical Item(s) in a small basket and place that basket inside the tank.

 

When you switch on the machine, ultrasound waves and chemicals combined to create bubbles that "cling" to the foreign particles such as dirt, oil, and unknown substances. The high frequency waves are sent out and pull the contaminants off of the object. The vibrating motion of the ultrasonic waves creates tiny bubbles in the water known as cavitation; millions of these bubbles rubs against each-other and into the object resting in the cleaning tank. This cavitation process gently knocks dirt & stain off the object. The motion is very effective at penetrating the tiny crevices which is not possible via human hand or by dunking the instrument in water/ chemical alone.

 

 

The Ultrasonic Cleaning Cycle time for the Surgical Instruments is approximately 3-5 Minutes depending upon the quantity of objects placed in the basket as well as the level of contamination of the same. Once you set the timer, the machine does its work in few minutes and the dirt now rests in the bottom of the tank. The cavitation effect blasts the particles off the instrument’s surface and leaves them in the solution. You can now remove the basket along with the Instruments and clean them with a dry soft cloth.

Additional Information:

• Item Code: RKTOT30
• Production Capacity: 100
• Delivery Time: 2 Days
• Packaging Details: Corrugated Box

Product Details:

Ultrasonic Jewelry Cleaner is a precious possession and needs to be taken care of. Often in our day to day life, we expose our jewellery items such as Rings and Chains to harsh chemicals, perfumes and many other components which can cause damage and discoloration of the jewellery items. Being the priced procession it is, we recommend regular care of the same to enhance its longevity.

There are a number of things you can do to take care of the Jewellery Items, but to ease the burden of rubbing/ scrubbing and using soap solutions, we bring to you our Ultrasonic Cleaner specially designed for cleaning of Jewellery Items.

An Ultrasonic Jewellery Cleaner comprises of a small tank (approx 2-3 Liters), small motor/ circuit for Cleaning the Ornaments, a removable basket / tray. To begin the cleaning process, the cleaning tank is filled with warm water or a cleaning solution. Cleaning solutions can consist of non-ionic surfactants, detergents or ammonia. You can then place your Jewellery Item(s) in a small basket and place that basket inside the tank.

When you switch on the machine, ultrasound waves and chemicals combined to create bubbles that "cling" to the foreign particles such as dirt, oil, and unknown substances. The high frequency waves are sent out and pull the contaminants off of the object. The vibrating motion of the ultrasonic waves creates tiny bubbles in the water known as cavitation; millions of these bubbles rubs against each-other and into the Ornaments resting in the cleaning tank. This cavitation process gently knocks dirt off the jewelry. The motion is very effective at penetrating the tiny crevices in jewelry that traditional cleaning cloths and topical cleaners cannot easily reach.

The Ultrasonic Cleaning Cycle time for the Ornaments is approximately 3-5 Minutes depending upon the quantity of Ornaments placed in the basket as well as the level of contamination of the same. Once you set the timer, the machine does its work in few minutes and the dirt now rests in the bottom of the tank. You can now remove the basket along with the Ornaments and clean them with a dry soft cloth.

We recommend Ultrasonic Cleaning for Hard Stones and Metals which are Diamonds, Gold, Silver, and Platinum however we do not suggest the same for Opal, pearls, coral and other soft stones. Ultrasonic Cleaning poses no threat to the Jewellery items as it is similar to brushing the Ornaments with a soft brush. The motion is controlled and localized such that the force generated does not damage the settings and stones.

Ornaments to Avoid using Ultrasonic Cleaning On:

• Pearls, Opal, Amber, Tanzanite, Emerald, Peridot, Agate, Amazonite, Topaz, Aquamarine, Turquoise, and Gemstones that have cracks or fractures.

 

Additional Information:

• Item Code: RKT2L
• Production Capacity: 100
• Delivery Time: 2 days
• Packaging Details: Corrugated Box