Automotive Ultrasonic Cleaners

Product Details:

For small autoparts such as plugs, screws, bolts, hex and fixtures, SS ball bearings and components with less than 100 mm length, we suggest a small ultrasonic autoparts cleaner which has a capacity of 4-5 Liters of water and can clean upto a kg of material within 3-30 minutes depending upon the component type and contamination load.

Small Ultrasonic Cleaner is usually meant for maintainence purpose rather than production purpose. It is also largely used by 3 tier OEMs for auto parts cleaning, by restoration companies, r&d labs in auto components and many other places. All our machines are strictly made with SS 316 tanks with 2 mm thicness for higher durability.

Features of the machine:

• Made with SS 316 L tank body
• Made with SS 304 outer frame
• Digital Timer & Digital Temperature controller
• Solid-State generator (separate)
• SS Cover and SS Basket included with machine
• 12 Months warrenty against any manufacturing defect
• AMC service also provided for long term service support

Product Details:

Auto Parts Cleaning machine

We are manufacturing and supplying of Automotive Ultrasonic Cleaners. We offer a wide range of ultrasonic cleaners. These are Single or Multistage Ultrasonic Cleaners, which are both manually operated & fully automated systems. Further, the machine is widely used and appreciated by our clients due to its professional dependability and user friendliness.

Ultrasonic Cleaning system Design:

Considerations in the design of any cleaning system include the contaminants on the part(s), the required cleanliness level, the geometry and material of the part(s), the quantity to be processed, and the previous system design and layout (if applicable). The part geometry, production rate, and cleaning time required will determine the size of the cleaning system, once the overall process has been decided

Cleanliness considerations :

In a typical aqueous ultrasonic cleaning system, it is the cleaning stage(s) that will remove or loosen the contaminants. The following rinse stage(s) remove any remaining loosened soils and residual detergent, and a dryer removes any remaining rinse water. The overall process of the system is usually determined experimentally. We have an applications lab where, through a process of experience, trial, and error, a properly designed cleaning process can be determined to meet the cleanliness levels specified. There are a variety of ways to check for cleanliness. Some are as simple as a water break test on the part to see if most oil has been removed. Others are as elaborate as surface quality monitoring that uses optically stimulated electron emission technology to measure thin films of contaminants down to the Angstrom level.

Part handling :

The geometry of the parts is carefully analyzed to determine how it will be placed in the cleaning tank. Large parts, such as engine blocks, can be suspended directly from a hoist, whereas smaller parts will usually be placed in a basket. The most important factor in parts placement is to be sure that air is not trapped anywhere inside the part. If an air pocket is allowed to form, such as in a blind hole that would be facing downward toward the bottom of the tank, the cleaning solution and effects of cavitations will not be able to reach this particular area. The part will have to be rotated somehow in the tank during the cleaning process to allow the cleaning solution to reach the area where air was previously trapped. This can be accomplished either manually, by the attending operator, or by a rotating arm on an automated lift mechanism.

Product Details:

We are the manufacturers of custom built Ultrasonic Cleaning machines for degreasing and cleaning of auto parts for OEMs , work shops , job works and auto-restoration industry. We expertise in providing customized designed solution for auto parts cleaning.

Ultrasonic cleaning is a water based cleaning solution where ultrasonic transducers are used to provide cavitation agigation insude the tank which has waer and suitable chemical to clean oil,dirt,debree,grease and other contaminants from various types of auto components.

We expertise in all types of ancilary parts washing like brakepads, steering coloumns, crank shats, pistons, valves, gaskets, clutch pads, mirrors and many more.

Features of the machine:

• Low maintainence machine
• Heavy duty cleaning systems
• Chemical friendly- SS Rust proof body
• Industrial guage farication, build to last
• One year warrenty on any manufacturing defect
• Completely customized to suit the cleaning requirement
• Less human interfearance and less scope of error
• Accurate and uniform cleaning everytime

Product Details:

Ultrasonic Cleaning machines are the best way to clean valves (automotive). We provide customize valve cleaning machines and valve washers as per the size and production capacity of the client. A typical valve cleaning machine can include an ultrasonic cleaning tank along with ultrasonic rinsing tank and a drying chamber.

We also provide suitable chemical for valve washing. Incase the production quantity is not much and incase you need to do maintenance for valves, we also provide a single chamber ultrasonic cleaning for valve washing which is very economical and cost effective.

Valve washing machine can also be used for cleaning of other auto components. Please connect with us for a one to one session to duscisson any autoparts cleaning proposition.

Product Details:

We are the manufacturers for crank washers and crank cleaning systems. We provide water based cleaning machines for crank cleaning. Ultrasonic technology is the best way to by which cleaning of cranks can be achieved effectively as well as at a standard quality.

Our machines are designed to work on industrial platform which are rigid and work for hours non-stop for ensure continuous production is not hampered. We also provide cleaning chemical along with the machine for crank cleaning.

Features of the machine:

• Easy to use
• Industrial grade steel rust proof make
• Water based cleaning method
• High Ultrasonic power for faster cleaning

Product Details:

We manufacture Large Ultrasonic Cleaner for Cleaning of Radiators, Engines, pistons and Cylinders. Such machines are used for companies providing refurbishment of auto parts and doing Job Work for Auto Oems.

Feature :

• Solid SS Steel body make
• Heavy Duty Ultrasonic system
• Removes Oil, Grease , Dirt, Debree
• Uses a Filteration unit for removal of Oil

Product Details:

Product Details:

We are the manufacturers of ultrasonic cleaning systems that are specifically designed to clean auto-parts for OEMs. All our machines are manufactured with stainless steel 316 L tank body for logetivity. Small automotive cleaners are 10 Liters ultrasonic cleaning units that are table top models suitable for cleaning of working load of approx 1.5-2kgs of material at a time with cleaning time varying between 3-30 minutes depending upon the component to be cleaned and the contamination load.

RKT 250 DTT is a 10 Liter ultrasonic cleaning equipment that has digital read-outs for timer and temerature controller. It is a roburst machine designed to run for 10 hours of continuous work.

You can clean all types of metallic and non-metallic auto parts using this machine. We also provide suitable automotive chemicals along with the machine for perfect cleaning. Incase you want a customized machine, please feel suggest us with the size of the components that you wish to clean, weight of the components that you wish to clean, quantity of the components that you wish to clean and also the contamination type. All this will help us decide a suitable machine for you which can be customized as well.

Product Details:

We at R.K.Transonic engineers are pioneers in providing cleaning solutions for auto parts manufacturers (OEMs, Job Works and auto parts restoration). Ultrasonic Cleaning machines are one of the best ways of cleaning auto parts becuase they save a lot of time and effort by minimizing human interfearance and thus the quality of the product is maintained.

Ultrasonic auto parts cleaning machines comes in various sizes ranging from 4 Liters, 5 Liters, 21 Liters, 30 Liters and 100 Liter capacity. These are known as single tank cleaning machines and are usually meant for smaller components where the production load is not much. Incase there are bulky components, we suggest a multi-tank cleaning system with more number of stages where we suggest a manual, semi-automatic and fully automaic system to our clients depeding upon the cleanliness criteria and the budget.

The single tank machines at R.K.Transonic are one of the fastest moving products for auto parts cleaning machines as they are heavy duty industrial cleaners with longer shelf life and we maintain the quality of the product by strictly sticking to SS 316 grade of metal for fabrication of working tanks.

Some of the key features of our machines:

• Heavy duty industrial ultrasonic cleaning machines
• Single tanks & multi-stage tanks can be customized as per the components to be cleaned
• All working tanks are made of SS 316 with 2 mm thickness
• All spares in our machines are testified for quality and logevity of the machine
• All the circuits and design of the machine are in-house
• We provide AMC for the Ultrasonic Cleaning machines for regular service as well.

Product Details:

Ultrasonic Bell Crank Washer is a cleaning system which cleans, degreases and dries bell cranks used in automotive industry. Ultrasonic is a water based washing system where a series of tanks are used to degrease, remove oil and dirt, clean, rinse and then finally dry the bell cranks. We expertise in custom built bell crank washers and cleaning systems for automotive sector.